24 Hour Response on Quoting

It is our goal to be as accurate, & competitive as possible when quoting on a new job, or re-quoting old jobs. Therefore we do require a part number if you’re an established customer, or a Mechanical Drawing of the part to be painted including any masking, or specific instructions. Our quotes are valid for 30 days, and can be E-mailed, Faxed, or Mailed. Check our web site for your RFQ form. Please print, and complete this form prior to calling Florida Finishing to obtain your quote with-in 24 hours.

Fast Turn-Around (Less than 10 Business Days from Signed & Dated P.O.)

Our average time on project turn-around is 5-10 business days. Although we do accommodate customer requests for a shorter lead time. For your convenience we offer an expedite fee to accommodate a decreased lead time at a slightly higher cost. Rest assured we will not sacrifice quality for speed. All RUSH projects will be produced with the same high standards as our standard lead time.

Customer / Military  Requirements

At Florida Finishing we’re accustomed to working with rigid CUSTOMER REQUIREMENTS. We have extensive knowledge of government specifications and welcome customers with government contracts that may require a chromating service, specific custom colors and finishes, fine to heavy textures, and EMI/RFI shielding. Although Florida Finishing primarily uses an approved multi-component urethane material to achieve the quality finishes that our customers desire, we are not limited in our expertise. We are equipped to apply a wide variety of water borne materials as well. Our team at Florida Finishing will meet the exact customer requirements, as well as MIL-Specs that may be specified by the customer

Blasting / Cleaning Pre-Treatment

Florida Finishing offers three “stock” blasting materials. 220 Grit Aluminum Oxide conforming to most MILITARY & Boeing SPEC's. 80 Grit Aluminum Oxide for general applications. And our Medium Grit house blend of Aluminum Oxide and glass bead.

Sprayed Primers

Florida Finishing offers a wide variety of wash primers, Epoxy Primers, Sandable Primers, and Putty.  It is not uncommon for our customers to require primer only on their products. Our high finishing standards remain unchanged regardless of wet finishing requirements. Check our web site for complete product specifications.

Sprayed Smooth Coat

Our most common product for smooth coat is Sherwin Williams Polane Polyurethane Enamel. You may choose from Polane B, a full gloss coating, Polane T, a low gloss coating, or Polane T-Plus, also a low gloss coating that meets strict EPA regulations for solvent emissions. Polane may be applied to a wide variety of substrates such as; plastics, aluminum, & steel. Check our web site for complete product specifications.

Sprayed Texture

Florida Finishing offers three “stock” textures. Custom textures are available upon request. Texture # TP100 is a fine texture commonly used in the medical, & electronics industries. Texture # TP 200 is a medium texture that is most commonly used in the electronics, military, and utility industries. Texture # TP 300 is a heavy texture commonly used by the electronics, audio, and utility industries. All Polane products have the capability of producing any level of texture. Visit our web site to see examples of our stock textures.

EMI / RFI Shielding, & Conductive Coatings.

Florida Finishing provides a wide variety of Shielding / Conductive coatings designed to meet or exceed your required specifications. Pigments available are Nickel, Silver, and Silver coated Copper.  In-house testing of resistivity, conductivity, and adhesion, using appropriate test equipment will ensure your required readings.

Part Marking

Part Marking is available upon request. Florida Finishing will use an indelible ink in either black or white to mark parts according to specifications.

Screen Printing

We provide screen printing upon request. Florida Finishing is capable of providing one color screen printing with halftone (up to 55 LPI) & fine line capabilities on most flat substrates. Epoxy ink is used to produce high quality prints on a variety of finishes. Please visit our web site to see examples of screen printing on plastic & metal parts.

Artwork Production & Re-production

Florida Finishing can design, & produce artwork as needed. We can also re-produce your artwork for screen printing applications. We have capabilities to scan, and output to clear, or matt film up to 11” by 17”.  Please contact us for a list of workable extensions (i.e. EPS, DXF, AI, etc.) to transport your design.

Vinyl Graphics

Our versatile equipment also allows us to supply you with a variety of signage, such as; Magnetic vehicle signs, Temporary lightweight plastic signs, Laminate signs, Direct truck lettering, Window lettering, etc. Please call for a quote on your next sign job.

Secondary Operations

Florida Finishing can also provide you with most secondary operations such as; hardware inserts, lens inserts, backfill lettering, pad printing, and light assembly.

Packaging

Using a variety of packaging materials, Florida Finishing will ensure your product arrives undamaged. All parts finished by Florida Finishing will be individually bagged in a 2 mil poly bag, and bundled to minimize wear on the part while in the shipping process.

Shipping & Delivery Service

We offer local delivery & pick up at a reasonable charge, as well as shipping to any location with-in the Continental USA. We will take great pride in ensuring your product will reach its destination on time, and with-out defect.